null
Samson

Samson High-Rise Mono Active Inline Microphone Booster

Write a Review
$79.99
Samson High-Rise Mono Active Inline Microphone Booster
Samson High-Rise Mono Active Inline Microphone Booster
Samson High-Rise Mono Active Inline Microphone Booster
Samson High-Rise Mono Active Inline Microphone Booster
Samson High-Rise Mono Active Inline Microphone Booster
Samson High-Rise Mono Active Inline Microphone Booster
Samson High-Rise Mono Active Inline Microphone Booster
Samson High-Rise Mono Active Inline Microphone Booster
SKU:
SAMA25
UPC:
809164027355
MPN:
809164027355
Width:
2.70 (in)
Height:
2.40 (in)
Depth:
5.30 (in)
Shipping:
$10.00 (Fixed Shipping Cost)
Current Stock:

With every purchase of $75 or more, use promo code "HOL24" at checkout to receive a free pair of Technical Pro HPS820 Professional Headphones.

Description

Samson High-Rise Mono Active Inline Microphone Booster

Boost your podcasts, live streams, studio recordings, and live performances with the High-Rise from Samson, a compact, inline microphone booster that provides up to +30 dB of ultraclean, transparent gain for very low output microphones. This active mic preamp is 48V phantom powered, delivering increased headroom for your signals without passing the phantom power to your microphone, protecting sensitive, passive ribbon mics from damage.

The class-A bipolar transistors ensure ultraclean gain, and the High-Rise sports switched controls for controlling your gain levels, including three gain settings (+20 dB, +20 dB with a high-frequency boost, and +30 dB) and a selectable high-pass filter at 120 Hz for reducing unwanted rumbling sounds. A simple mono XLR 3-pin input and output design makes it easy to connect to your microphone signal path in any setup, and the rugged 14-gauge steel enclosure will protect your electronics from damage in virtually any scenario, from heavy pro or home studio usage, to demanding tours and live venues.

Take Your Mic to New Heights

The High-Rise is a pre-preamp that boosts the signal of very low output mics connected to mixers, interfaces or stand-alone mic preamps that have too small of a gain range (typically a maximum of +40 to +55 dB), making some mics unusable with normal speaking levels or soft instruments.

Moving On Up

Its high-quality preamp has selectable +20 or +30 dB of clean gain, which increases headroom and allows you to achieve a usable level at the connected preamp with a much lower gain setting, thus reducing additional noise to the signal chain. The result is the best possible audio performance for low-output passive mics. It also has a +20 dB setting with a high-frequency lift for enhanced vocal presence to your performance. A selectable low-cut filter removes muddiness to improve clarity in the mic signal.

Above the Rest

A high-performance class-A design in a fully differential input and output arrangement delivers an exceptionally clean and highly transparent signal. The High-Rise operates off of phantom power, so there are no additional power supplies needed. It does not pass phantom power to the microphone, making it perfectly safe to use with delicate passive ribbon mics.

Road Ready

Tough, road ready, and highly portable, the High-Rise is housed in a 14-gauge steel enclosure that protects the electronics, and it's built to withstand the abuse of the most demanding tours or busy professional studios.

Tech Specs

In-Line Accessory Type:
Preamplifier
Input / Output Level:
Input: Mic Level, Output: Mic Level
Number of Channels:
1
Gain:
Up to +30 dB (Selectable)
High-Pass Filter:
120 Hz
Circuit Type:
Class-A BJT
Controls:
1 x Input Level/Gain Switch | 1 x Low Cut/HPF Switch
Inputs/Outputs:
1 x XLR 3-Pin Female Balanced Mic Input | 1 x XLR 3-Pin Male Balanced Mic Output
Operating Voltage:
48 V (Phantom Power)
Shielded:
Yes

Delivery & Returns

At Gear Club Direct, we want you to be happy with your purchase. We understand that there are times when once a product is received, it may not be what you needed or wanted after all. So, we will gladly accept your qualifying return within 15 days of the delivery date. After 15 days of the delivery date, all sales are final. 

 

The Return Process
Customers are required to obtain a Pre-Authorization to return any product. To submit a request for a return, simply log in to your account and request a return and one of our sales representatives will contact you within 24-48 business hours. If you do not have an account with us, please open a help ticket, providing as much detail as possible and whether you are requesting a refund or an exchange.  READ MORE

Customer Reviews

Related Products