Description

ProX XTP-GS303023-PR3-12D 12D Stage Roofing System 30'W x 30'L x 23'H & Speaker Wings - Incl 6 Chain Hoist

The ProX XTP-GS302023-PR3-12D Stage Roofing System with Speaker Wings is 30'W x 20'L x 23'H and Includes 4 Chain Hoists. The 30-foot by 20-foot trussing area is large enough to cover a multi-person live band or a very large DJ production set up and the 7 foot wings are more than enough to hang speakers and lighting fixtures. You can hang lighting, curtains, video screens and speakers from the truss system and adjust the height up to 23 feet high. Scalable to smaller staging needs. The entire structure is lifted and held in place with Six (6) chain hoist lifting stations that are the stands that support the entire system. The stage roof trussing is designed to hold lighting and audio gear evenly distributed around the stage roofing system. Guy wires required for most installations!

In this package, you have everything you need for a complete roofing solution:

6 - XTP-GSBPACK3 Truss Tower Lift Systems,
12 - XT-SQ984 9.84ft (3.00m) Square Truss Segment,
20 - XT-SQ705 7.15ft(2.15m) Square Truss Segment,
12 - XT-SQ12D 9"(0.23m) 12D Corner,
2 - XT-JB6W-4W 6 Way Square Truss Junction Block,
8 - XT-SPFF105 Spacer 105mm Female Coupler,
2 - XT-SQ656 6.56ft(2.00m) Square Truss Segment,
3 - XT-MCH1TX2-30FT Sets of 2 1T Manual Chain Stage Hoist with 30ft Chain,

ProX XT-SQ series trussing is a rugged and durable trussing package solution. Perfect for live outdoor or indoor productions, exhibitions, as well as nightclubs, and other permanent installations. ProX Live Performance Gear® offers a wide variety of single tubes, mounting plates, clamps and accessories that allow limitless design configurations to suit your needs. Always consult an engineer for complex designs!

ProX XT-SQF34 2MM SERIES DIMENSIONS:

Height: 11.42in / 290mm
Width: 11.42in / 290mm
Weight: 21lb/9,5kg per 3.28 ft / 1 meter
Main Tube: 2in / 50mm
Wall Thickness: .08in / 2mm
Braces: .75in / 20mm

IMPORTANT: Always know your load weight for your equipment: XT-SQ Truss Loading Chart

WARNING: All ProX products are made with the highest safety standards with TUV certified welding. For the safety of your people, event, and equipment, it is crucial to have a professional rigger install and verify the truss loading chart before use. Improper installation may result in damage or injury. The ballast and the guy wire assembly must be installed per the engineering drawings to meet certification requirements. ProX is not responsible for damages caused by misuse or improper installation. Don't compromise on safety, hire a professional rigger.

Features

Manufactured to Exacting Specifications in our Own Factory!
Tolerance Free Standard Conical Connectors
Truss Main Tube Wall Thickness of .08in / 2mm
Load Capacity is 1 Ton (2000 lbs) per corner lift unit (4 tons total weight including truss)
Material: EN-AWT6 6082 Aluminum and Welded Steel (Painted Black)
TUV Certified Aluminium/Steel Welding

TUV is a 3rd Party Certification Body and a Nationally Recognized Testing Laboratory (NRTL). TUV provides inspections, testing, certification & training, with the ultimate objectives of reliability, safety & high quality.

ProX Truss products utilize industry standard dimensions to be compatible to connect to/ and work with many other manufacturers' F34 trussing products with conical connectors.

Package Contents

XT-SQ984 (12) 9.84 Ft - 3.00 M F34 Square Truss Segment | 2 mm Wall
XT-SQ12D (12) 12 Degree F34 Square Truss Angle Connector | 2mm Wall
XT-JB6W-4W (2) 6 Way Square Truss Junction Block - Includes 4 Way 16 Half Conical Couplers
XT-SPFF105 (8) Spacer 105mm Female Coupler
XT-SQ656 (2) 6.56 Ft - 2.00 M F34 Square Truss Segment | 2 mm Wall
XT-SQ705 (20) 7.05 Ft - 84.64 Inch - 2.15 M F34 Square Truss Segment 2 mm Wall
XT-BLOCK-MK2 (6) Ground Support Sleeve Block for F34 Truss Segment Systems
XT-TOPCM (6) Top Truss Section for Electric Motor or Manual Chain Hoist
XT-GSB MK3 (6) Universal Vertical Tower Truss Ground Support Base on Wheels with Leveling Jacks for F34, F44 and 12" Bolt truss
XT-SQ328 (6) 3.28 Ft - 1.00 M F34 Square Truss Segment | 2 mm Wall
XT-HINGE (24) Conical Tube Ground Support Post towers Male to Male Hinge Joint Fits F31 F32 F34
XT-MCH1TX2-30FT (3) Pair 1 Ton Manual Chain Hoist with 30 Ft (9 M) Chain for Stage Truss roof system and line array speakers
XT-GSOUTS3 (24) Single 3 Ft. Outrigger Support Brace for Leveling Ground Support Truss Tower Base

Exterior Dimensions & Weight
XT-GSOUTS3 (24): 64.00"H x 2.00"W x 37.50"L - Weight: 29.00 lbs
XT-SQ328 (6): 39.36"H x 11.42"W x 11.42"L - Weight: 19.00 lbs
XT-TOPCM (6): 11.50"H x 9.50"W x 24.00"L - Weight: 26.40 lbs
XT-BLOCK-MK2 (6): 18.50"H x 22.50"W x 22.50"L - Weight: 77.30 lbs
XT-SQ656 (2): 78.72"H x 11.42"W x 11.42"L - Weight: 31.00 lbs
XT-JB6W-4W (2): 11.45"H x 11.45"W x 11.45"L - Weight: 17.00 lbs
XT-SQ12D (12): 11.42"H x 11.42"W x 10.00"L - Weight: 8.00 lbs
XT-SQ984 (12): 118.08"H x 12.00"W x 12.00"L - Weight: 42.00 lbs

Shipping Dimensions & Weight
Box 1 of 12: XT-GSOUTS3 (24 boxes) 6.00"H x 8.00"W x 64.00"L - Shipping Weight: 34.00 lbs
Box 2 of 12: XT-MCH1TX2-30FT (3 boxes) 11.00"H x 19.00"W x 15.00"L - Shipping Weight: 104.00 lbs
Box 3 of 12: XT-HINGE (24 boxes) 2.00"H x 5.00"W x 5.00"L - Shipping Weight: 2.50 lbs
Box 4 of 12: XT-SQ328 (6 boxes) 41.50"H x 12.50"W x 12.50"L - Shipping Weight: 21.00 lbs
Box 5 of 12: XT-GSB MK3 (6 boxes) 9.00"H x 29.00"W x 29.00"L - Shipping Weight: 70.00 lbs
Box 6 of 12: XT-TOPCM (6 boxes) 12.00"H x 10.00"W x 25.00"L - Shipping Weight: 28.00 lbs
Box 7 of 12: XT-BLOCK-MK2 (6 boxes) 20.00"H x 24.00"W x 24.00"L - Shipping Weight: 80.00 lbs
Box 8 of 12: XT-SQ705 (20 boxes) 13.00"H x 13.00"W x 86.00"L - Shipping Weight: 30.00 lbs
Box 9 of 12: XT-SQ656 (2 boxes) 80.50"H x 13.00"W x 13.00"L - Shipping Weight: 35.00 lbs
Box 10 of 12: XT-JB6W-4W (2 boxes) 12.50"H x 12.50"W x 12.50"L - Shipping Weight: 17.50 lbs
Box 11 of 12: XT-SQ12D (12 boxes) 12.00"H x 12.00"W x 12.00"L - Shipping Weight: 9.00 lbs
Box 12 of 12: XT-SQ984 (12 boxes) 14.00"H x 14.00"W x 120.00"L - Shipping Weight: 46.00 lbs

Delivery & Returns

At Gear Club Direct, we want you to be happy with your purchase. We understand that there are times when once a product is received, it may not be what you needed or wanted after all. So, we will gladly accept your qualifying return within 15 days of the delivery date. After 15 days of the delivery date, all sales are final.

The Return Process
Customers are required to obtain a Pre-Authorization to return any product. To submit a request for a return, simply log in to your account and request a return and one of our sales representatives will contact you within 24-48 business hours. If you do not have an account with us, please open a help ticket, providing as much detail as possible and whether you are requesting a refund or an exchange. READ MORE