The P3 PowerPort 1500 is an integrated power and data processor for Martin’s range of creative LED video products, including the VDO SceptronsTM, Exterior PixLinesTM ,VC-GridsTM, VC-StripsTM and VC-Dots™. When driven by one of Martin’s award-winning P3 System Controllers™, it powers the connected products with high-quality image processing capabilities and extremely easy setup and configuration.

• Indoor Power & Data Processor for all Martin Creative LED Video products
• Can be located far away from creative products for easy integration
• Easy cabling and configuration

Features

• P3 image processing technology
• Set-up and addressing via P3 System Controller family
• P3 input and thru to allow daisy-chaining
• 4 hybrid power/data output ports
• Wall-, truss- and rack-mountable
• Can be located up to 50 m away from the creative LED video products

Specifications

Physical

• Depth: 335 mm (13.2 in.)
• Width: 482 mm (19.0 in.)
• Height (rackmount 2U): 88 mm (3.5 in.)
• Weight: 10 kg (22.1 lbs.)

Control and Programming

• Addressing and status: Via P3 System Controller
• Mapping: Via P3 System Controller
• Firmware update: Via P3 System Controller

Control/User Interface

• Device status: Multicolor status LED
• Power output status: Four LEDs
• Data output status: Four LEDs
• Device test and reset: Pushbutton to call up local test patterns and reset device

P3 Signal Protocol

• Signal type: Gigabit Ethernet
• Protocol: Proprietary Martin P3
• Hot pluggable: Yes, electrically isolated at all connections
• Cable type: Ethernet, CAT 5e or better
• Cable length: Up to 100 m between any 2 devices, extendable with Ethernet switch

System integration

• VC-Dot™ family via VC-Feeder™
• VC-Grid™ family
• VC-Strip™ family

Construction

• Housing: Steel and aluminum
• Color: Matt black
• Protection rating: IP20

Installation

• Mounting: 19-inch rackmount, wall mount, flown from rigging clamps

Connections

• Power input: Neutrik PowerCon
• P3 data in/out: Two Neutrik Ethercon RJ-45 sockets
• Combined power & data out: Four 4-pin female XLR sockets (hybrid power & data cable)

Electrical

• AC power: 100-240 V nominal, 50/60 Hz
• Power supply units: Auto-ranging electronic switch-mode
• Main fuses: 10 AT (slow blow) x 4
• Typical total power consumption: 1540 W (including full load of connected display devices, all at full intensity)

Thermal

• Cooling: Filtered forced air (temperature-regulated, low noise)
• Maximum ambient temperature (Ta max.): 45° C
• Minimum ambient temperature (Ta min.): -20° C
• Total heat dissipation (calculated, +/- 10%): 530 BTU/hr. (PowerPort 1500™ only, system at full load)

Approvals

• EU safety: EN 60950
• EU EMC: EN 55103-1, EN 55103-2, EN 55022, EN 55024, EN 61000-3-2, EN 61000-3-3
• US safety: ANSI/UL 60950-1
• Canadian safety: CSA C22.2 No. 60950-1

Included Items

• Mounting brackets incl. screws
• Safety cable attachment eyelet
• Please note that a power input cable is not supplied with the product and must be ordered separately (see Accessories)