Martin MAC ENCORE WASH,CLD,EPS,WHITE

Designed to produce rich color and premium white light in a wide variety of applications where light quality is critical, the MAC Encore™ Wash CLD is an LED-based alternative to the MAC Viper Wash DX. The feature-packed soft edge moving head offers unparalleled 6000 K crisp, neutral daylight, and doubles as a modern replacement for generic fixtures like HMI based Fresnel fixtures, with the additional benefit of color mixing and movement.

• Unparalleled 6000 K cold white light quality
• Super silent cooling and effects operation
• Best-in-class size/weight/performance ratio

Features

• Pure white LED engine with 6000 K CCT.
• No color temperature variation during zoom and dimming.
• Flicker-free operation—LED driver frequency suitable for all camera applications.
• Whisper-silent—Combines convection and forced air cooling with user-selectable output vs. sound level control.
• Fully electronic dimmer/shutter control with various dimming curves and tungsten red-shift emulation.
• Vibrant CMY color mixing with a superior palette of colors ranging from rich, saturated primary colors to light and smooth pastel shades.
• Variable CTO—daylight to tungsten CCT control and expansion of the CMY palette that stays true to the black body curve.
• Color wheel—6 interchangeable dichroic filters + open.
• Fresnel lens: 1:4 zoom—precise, silent and fast zoom.
• PC lens (optional): 1:5 zoom—precise, silent and fast zoom.
• Internal barndoor system with two shutter blades and iris. Shutter blades can overlap for full blackout and the entire system rotates +/- 100°. Repeats cues with great precision.
• Precise and tight iris with adjustable dynamic effects.
• Animotion™ FX System—Internal dimming effect macros for stunning 3D mid-air and projection effects.
• Super precise and silent pan/tilt movement and positioning due to 3-phase stepper motor technology and absolute position monitoring.
• Compact size—L: 452 x W: 480 x H: 745 mm / L: 17.8 x W: 18.9 x H: 29.3 in.
• Low weight—28.5 kg/62.9 lbs
• Foam rubber (SIP) flight case insert for secure shipment. 

Specifications

Physical

Length:

452 mm (17.8 in.)

Width:

480 mm (18.9 in.) across yoke

Height:

755 mm (29.8 in.) maximum
745 mm (29.4 in.) head straight up

Weight:

28.5 kg (62.9 lb.)
Minimum center-to-center distance in side-by-side installation: 730 mm (28.8 in.)

Dynamic Effects

• Pre-programmed effects: Two ranges of FX, independent or synchronized/combined
• Color mixing: CMY, independently variable 0 - 100%
• Color temperature control: Variable 6000 - 2700 K
• Color wheel: 6 x interchangeable dichroic filters + open, indexing, continuous rotation, random color
• Barn doors: Internal, two blades with individually controllable insertion, +/- 100° module rotation
• Iris: Variable 0 - 100%
• Dimmer/shutter: 0 - 100% continuous dimming, regular and random strobe and pulse effects, instant open and blackout
• Dimming options: Choice of four dimming curves
• Zoom: Motorized
• Focus: Range varies with zoom angle, from approx. 2 m (6.6 ft.) / 6 m (19.7 ft.) to infinity
• Pan: 540°
• Tilt: 268°
• Position correction system: Absolute position monitoring

Control and Programming

• 16-bit control: Dimming, pan and tilt
• Movement control options: Tracking and vector
• Setting and addressing: Control panel with backlit graphic display and jog wheel or via DMX
• DMX channels: 24
• Fixture Identification: User-settable ID number
• DMX compliance: USITT DMX512-A
• RDM compliance: ANSI/ESTA E1.20
• Transceiver: Opto-isolated RS-485
• Fixture software update: USB memory device or over DMX link

Optics

• Light source: 6000 K white LEDs
• CRI (Color Rendering Index): >80
• Total LED engine power: 468 W
• Minimum LED lifetime: 50,000 hours (to >80% luminous output)*
• Zoom range with Fresnel lens (standard): 14° - 60° one-tenth peak (1:4)
• Zoom range with PC lens (optional): 11° - 58° one-tenth peak (1:5)
• *Figure obtained under manufacturer's test conditions

Photometric Data

• Light engine luminous output: ≥ 39,400 lumens
• Fixture luminous output with Fresnel lens (standard): 11,000 lumens
• Fixture luminous output with PC lens (optional): 12,000 lumens
• CQS (Color Quality Scale): >80
• TM-30 Rf (IES TM-30-15 Fidelity Index): >80
• TM-30 Rg (IES TM-30-15 Gamut Index): >96
• TLCI (Television Lighting Consistency Index): >70

Construction

• Housing: High-impact flame-retardant thermoplastic
• Color: Black
• Protection rating: IP20

Installation

• Mounting points: 4 pairs of 1/4-turn locks
• Location: Dry location only, must be fastened to surface or structure
• Orientation: Any
• Minimum distance to combustible materials: 0.2 m (8 in.)
• Minimum distance to illuminated surfaces: 2.0 m (6.6 ft.)

Connections

• AC power input: Neutrik TRUE1 socket (accepts Neutrik TRUE1 NAC3FX-W connector)
• DMX and RDM data in/out: 5-pin locking XLR

Electrical

• AC power: 120-240 V nominal, 50/60 Hz
• Power supply unit: Auto-ranging electronic switch-mode
• Power Consumption: 64 W
• Half-cycle RMS inrush current at 230 V, 50 Hz: 10.3 A

Typical Power and Current

• 120 V, 60 Hz: 5.0 A, 596 W, PF 0.998
• 208 V, 60 Hz: 2.9 A, 581 W, PF 0.988
• 230 V, 50 Hz: 2.6 A, 580 W, PF 0.981
• 240 V, 50 Hz: 2.2 A, 585 W, PF 0.979
• Figures are typical, not maximum. Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%. PF = power factor

Thermal

• Cooling: Combined convection and forced air (temperature-regulated, low noise, user-definable levels)
• Maximum ambient temperature (Ta max.): 40° C (104° F)
• Minimum ambient temperature (Ta min.): 5° C (41° F)
• Maximum surface temperature, steady state, at 40° C ambient: 75° C (167° F)
• Total heat dissipation (calculated, +/- 10%): 2000 BTU/hr.

Approvals

• EU safety: EN 60598-2-17, EN 62471, EN62493
• EU EMC: EN 55015, EN 55032, EN 55103-2, EN 61000-3-2, EN 61000-3-11, EN 61547
• US safety: UL 1573
• US EMC: FCC Part 15 Class A
• Canadian safety: CSA C22.2 No. E598-2-17
• Canadian EMC: ICES-003 Class A
• Australia/NZ: RCM

Included Items

• Two omega brackets with 1/4 turn fasteners for rigging clamp attachment