The Exterior PixLine 10 is a linear LED video fixture for media facades and creative installations. The Exterior PixLine 10 can be combined with a wide variety of lenses and diffusers for the right look for every application. The Exterior PixLine 10 is driven by the Martin P3 System Controller family for easy setup and video display, and it is also backwards compatible with DMX. The fixtures can be fully customized in terms of length and color to match every installation requirement, while the power source is hidden.

• Wide variety of pixel pitch, lens and diffusers options for flexibility of look
• Fully outdoor-rated and customizable in terms of length and color
• Easy setup and cabling for clean installation

Features

• 10 mm pixel pitch
• 250 cd per meter calibrated
• 160 lumen per foot calibrated
• High-quality 16-bit per color image processing technology
• Pixel-level brightness and color calibration for optimal image quality
• P3/DMX controllable (automatic protocol detection)
• Intuitive mapping and addressing via P3 System Controller
• Combined power/data input (single cable for power and data input)
• Supported by integrated power and data processor (P3 PowerPort 1500 or P3 PowerPort 1000 IP) and simple cabling system
• Available in standard length of 1280 mm and 320 mm (customized lengths also available)

Specifications

Physical 

• Length: Available in 320 mm (12.6 in.) and 1280 mm (50.4 in.) length versions
• Custom lengths are available to special order on project basis as follows:
• Minimum custom length: 300 mm (11.9 in.)
• Maximum custom length: 2000 mm (78.8 in.)
• Custom length increments: 20 mm (0.8 in.)
• Width: 27 mm (1.1 in.)
• Height with flat diffuser / clear front: 32 mm (1.3 in.)
• Height with flat diffuser / clear front in mounting profile: 74 mm (3.0 in.)
• Height with asymmetric wallwasher lens: 42 mm (1.7 in.)
• Height with asymmetric wallwasher lens in mounting profile: 84 mm (3.4 in.) 
• Height with round diffuser: 42 mm (1.7 in.)
• Height with round diffuser in mounting profile: 84 mm (3.4 in.)
• Weight: 1.2 kg / m (0.9 lbs. per foot)

Control and Programming

• Control options: Martin P3™
• System Controller via Martin P3™ PowerPort 1500 / Martin P3™ PowerPort 1000 IP, and/or DMX
• Protocol detection: Automatic Control modes: RGB, basic, segment and pixel-level
• DMX channels: 3/10/13/31/103/391 Setting and addressing: Martin P3™
• System controller or RDM-compliant controller
• Control resolution: 16-bit (P3) or 8-bit (DMX) control of each color
• Color and intensity calibration: Pixel-level
• DMX compliance: USITT DMX512-A
• RDM compliance: ANSI/ESTA E1.20
• Firmware update: Via Martin P3™ System Controller

Control/User Interface

• Device status: Multi-color visual indication
• Device test and reset: Magnetic pushbutton to call up local test patterns and reset device

Optics

Options

• Clear Front
• Flat Diffuser
• Round Diffuser
• Square Diffuser
• Linear Asymmetric Lens (Graze version)
• Minimum LED lifetime: 50 000 hours (to >70% luminous output)

Photometric Data

• Color resolution: 16 bits per color (48 bit per pixel)
• Viewing angle: 120° x 120°
• Pixels per meter: 100 Pitch (pixel center-to-center): 10.00 mm
• Luminous intensity, calibrated mode: 250 cd per meter*
• Total output, calibrated mode: 750 lumens per meter*
• Total output, calibrated mode: 8 333 nits (modules spaced 30 mm center-to-center)

Video Processing

• Brightness control
• Gamma correction and control
• Color temperature control
• Color space control
• Calibration processing Synchronization

Signal Protocol

• P3 (via Martin P3™ PowerPort) or DMX

Construction

• Base: Extruded aluminum profile
• Color: Alu Grey (customized colors available on project basis)
• Protection rating: IP66
• Impact resistance: IK05 RoHS compliant

Installation

• Orientation: Any
• Mounting: Slot for locking nuts on back of profile (M6) and/or installation mounting profile

Connections

• Power and data input: 6-pin custom (BBD) IP66-rated
• Power and data thru: 6-pin custom (BBD) IP66-rated
• Hot plugging compatible

Electrical

• Nominal input voltage: 48 VDC +/- 4%
• Power supply options: Martin P3™ PowerPort 1500, P3™ PowerPort 1000 IP, Tripix™
• Power IP66 or generic 48 VDC PSU
• Max. total power consumption: : 33 W per meter (at max. intensity, full white)

Thermal

• Cooling: Convection
• Maximum ambient temperature (Ta max.): 55° C (131° F)
• Minimum ambient temperature (Ta min.): -20° C (-4° F)
• Total heat dissipation (calculated, +/- 10%): 115 BTU/hr per meter

Approvals

• EU safety: EN 60950-1,
• EN 60950-22 EU EMC: EN 55022,
• EN 55024, EN 61000-3-2,
• EN 61000-3-3 US safety: UL 60950-1, UL 60950-22
• US EMC: FCC Part 15 Class A
• Canadian safety: CSA C22.2 No. 60950-1, No. 60950-22
• Canadian EMC: ICES-003 Class A
• Australia/NZ: RCM

Accessories

• Magnetic Test Tool, set of 10: P/N 91610139

Mounting hardware

• Exterior PixLine™ 10 Mounting Profile, 320 mm (12.6 in.), aluminum: P/N 91611620
• Exterior PixLine™ 10 Mounting Profile, 1280 mm (50.4 in.), aluminum: P/N 91611610 Exterior PixLine™
• Mounting Profile Locks, set of 10: P/N 91611725

Cables

• Power + Data Input Cable, 4-pin male XLR (for P3 PowerPort 1500) to fem. BBD, 0.25 m (0.9 ft.): P/N 11840257
• Power + Data Input Cable, 5-pin male XLR + wire tails (for PSU) to female BBD, 0.25 m (0.9 ft.): P/N 11840276
• Power + Data Input Cable, 5-pin male XLR + male Tripix IP66 PSU to fem. BBD, 0.25 m (0.9 ft.): P/N 11840275
• Power + Data Extension Cable, Installation type CMX, BBD-BBD 1 m (3.3 ft.): P/N 11840270
• Power + Data Extension Cable, Installation type CMX, BBD-BBD, 2.5 m (8.2 ft.): P/N 11840271
• Power + Data Extension Cable, Installation type CMX, BBD-BBD, 5 m (16.4 ft.): P/N 11840272
• Power + Data Extension Cable, Installation type CMX, BBD-BBD, 10 m (32.9 ft.): P/N 11840273
• Power + Data Extension Cable, Installation type CMX, BBD-BBD, 25 m (82.1 ft.): P/N 11840274
• Power + Data Extension Cable, Installation type CMX, without connectors, 100 m (328.1 ft.): P/N 11840278
• Blanking caps for unused female BBD connectors, set of 10: P/N 62409876
• DMX Leadout Adapter, male BBD to 5-pin female XLR, 0.25 m (0.9 ft.): P/N 11840258

Connectors

• Power + Data Cable Connector, BBD, male: P/N 91611750
• Power + Data Cable Connector, BBD, female: P/N 91611751