This extremely bright LED profile fixture combines top-quality white light with a fast, smooth CMY color mixing system and crisp gobo projection on surfaces as well as mid-air.

With all this and the new Animotion™ FX system that allows never-before seen beam animations, the market is now finally seeing the first real 700/800 W discharge lamp replacement in a profile fixture that effectively harnesses cutting-edge LED technology.

• First real alternative to a 700/800 watt HID fixture
• Flat field, crisp image, high contrast
• Full feature set including CMY color mixing and 1:3 zoom

Features

• First real alternative to a 700/800 watt HID fixture
• Flat field, crisp image, high contrast
• Full feature set including CMY color mixing and 1:3 zoom
• Very low weight and compact design
• Super high-speed movements and effects
• Consistent photometric performance via latest LED technology

Specifications

Physical

• Length: 452 mm (17.8 in.)
• Width (across yoke): 431 mm (17.0 in.)
• Height (head straight up): 642 mm (25.3 in.)
• Height (maximum): 648 mm (25.5 in.)
• Weight: 23.2 kg (51.1 lbs.)

Dynamic Effects

• Color mixing: CMY, independently variable 0 - 100%
• Color wheel: 6 color filters plus open
• Rotating gobo wheel: 6 interchangeable gobos plus open, wheel rotation, gobo rotation, indexing and shake
• Static gobo wheel: 10 gobos plus open, wheel indexing, rotation and shake
• Beam effects: Rotating three-facet prism
• Zoom: Motorized
• Focus: Motorized, with zoom-focus tracking
• Iris: 0 - 100%, pulse effects
• Shutter effect: Electronic, with variable speed regular and random strobe
• Electronic dimming: Four dimming curve options
• Pan: 540°
• Tilt: 268°
• Pan and tilt speed: Adjustable via onboard control panel and DMX

Control and Programming

• Control system: DMX
• RDM: Implemented
• Control resolution: 8-bit, with 16-bit control of dimming, gobo indexing, zoom, focus, pan and tilt
• DMX channels: 19/27
• Setting and addressing: Control panel with backlit graphic display
• DMX compliance: USITT DMX512-A
• RDM compliance: ANSI/ESTA E1.20
• Transceiver: RS-485
• Fixture software update: Direct using USB memory stick or via DMX link using Martin USB Duo™ DMX Interface Box

Optics

• Light source: 475 W LED engine
• LED refresh rate: 3000 Hz
• Minimum LED lifetime: 50 000 hours (to >70% luminous output)*
• Zoom range: 12° - 36° (1:3)
• Output: 12 700 lumens
• *Figure obtained under manufacturer´s test conditions
• Construction
• Color: Black
• Housing: High-impact flame-retardant thermoplastic
• Protection rating: IP20

Installation

• Mounting points: 4 pairs of quarter-turn locks
• Location: Indoor use only, must be fastened to surface or structure
• Orientation: Any
• Minimum distance to combustible materials: 0.2 m
• Minimum distance to illuminated surfaces: 2.0 m

Connections

• AC power input: Neutrik PowerCon
• DMX and RDM data in/out: 5-pin locking XLR

Electrical

• AC power: 120-240 V nominal, 50/60 Hz
• Power supply unit: Auto-ranging electronic switch mode
• Maximum total power consumption: 750 W
• Typical power consumption, all effects static, zero light output:Approx. 50 W
• Typical half-cycle RMS inrush current: 10.3 A
• Typical Power and Current
• 120 V, 60 Hz: 4.8 A, 576 W, PF 0.999
• 208 V, 60 Hz: 2.8 A, 568 W, PF 0.991
• 230 V, 50 Hz: 2.5 A, 565 W, PF 0.988
• 240 V, 50 Hz: 2.4 A, 565 W, PF 0.988
• Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.

Thermal

• Cooling: Forced air (temperature-regulated, low noise, user-definable levels)
• Maximum ambient temperature (Ta max.): 40° C
• Minimum ambient temperature (Ta min.): 5° C
• Total heat dissipation (calculated, +/- 10%): 2000 BTU/hr.

Approvals

• EU safety: EN 60598-2-17 (EN 60598-1), EN 62471
• EU EMC: EN 55015, EN 55032, EN 55103-2, EN 61000-3-2, EN 61000-3-3, EN 61547
• US safety (pending): UL 1573
• US EMC: FCC Part 15 Class A
• Canadian safety (pending): CSA C22.2 No. E598-2-17 (CSA E60598-1)
• Canadian EMC: ICES-003 Class A
• Australia/NZ: C-TICK N4241