null
JBL

JBL CONTROL 28-1L - 8" 2-WAY SURFACE-MT SPKR, 8 OHM, BLK Low-Impedance-Only Version of Control 28-1 (&-WH), without 70V/100V transformer, 8 ohms only.

Write a Review
$296.00
JBL CONTROL 28-1L - 8" 2-WAY SURFACE-MT SPKR, 8 OHM, BLK Low-Impedance-Only Version of Control 28-1 (&-WH), without 70V/100V transformer,  8 ohms only.
JBL CONTROL 28-1L - 8" 2-WAY SURFACE-MT SPKR, 8 OHM, BLK Low-Impedance-Only Version of Control 28-1 (&-WH), without 70V/100V transformer,  8 ohms only.
JBL CONTROL 28-1L - 8" 2-WAY SURFACE-MT SPKR, 8 OHM, BLK Low-Impedance-Only Version of Control 28-1 (&-WH), without 70V/100V transformer,  8 ohms only.
JBL CONTROL 28-1L - IMG01
SKU:
CONTROL 28-1L
UPC:
6.91991E+11
MPN:
6.91991E+11
Width:
13.75 (in)
Height:
18.00 (in)
Depth:
11.25 (in)
Shipping:
Free Shipping
Current Stock:

With every purchase of $75 or more, use promo code "HOL24" at checkout to receive a free pair of Technical Pro HPS820 Professional Headphones.

Please note: if you return the item for any reason, the cost of the headphones will be deducted from your refund amount

Description

High-Output 8-Ohm Indoor/Outdoor Background/Foreground Speaker
 
The Control® 28-1L is a two-way 8” speaker with rich sonic character, wide coverage, consistent coverage, versatile mounting, and a contemporary high-design look that fits into a wide range of decors, This makes Control 28-1L an excellent choice for a wide variety of applications, including retail stores, restaurants, health clubs, theme parks, educational facilities, hospitality, music cafes, leisure venues, and anywhere where a top quality high-output indoor/outdoor foreground/background music (and/or paging) speaker is required.

FEATURES

  • 8” woofer with woven fiberglass cone
  • 1” PEI diaphragm tweeter with fluid cooling
  • Contemporary, high-design appearance
  • Built-in InvisiBall® mounting hardware, plus available U-bracket
  • Weather resistant enclosure and transducers
  • Wide 100° x 100° coverage
  • 120 Watt power handling (240 Watt program)
  • High fidelity sound character with broad frequency response of 45 Hz – 20 kHz.

SPECIFICATIONS

  Frequency Range (-10 dB) 45 Hz to 20 kHz
  Frequency Response (+/-3 dB) 62Hz - 16 kHz
  Power Rating2 240 W Continuous Program (2 hrs)
  Maximum Input Voltage 27.5 V RMS (2 hrs), 55.0 V peak
  Maximum SPL3 112 dB ave. Continuous Pink Noise (118 dB peak)
  Sensitivity4 91 dB, 1W/1m (ave. 100 Hz – 10 kHz)
  Coverage Angle5 100° x 100°
  Directivity Factor (Q) 7.3 (averaged 1kHz – 16kHz)
  Nominal Impedance 8 ohms
  Crossover Type 2nd order low-pass, 1st order high-pass, plus conjugate shaping
  Recommended Protective High-Pass6 45 Hz high-pass (24 dB/oct)
  Low Frequency Driver 200 mm (8 in), woven-fiberglass cone with pure butyl rubber surround with Weather-Edge frame protection, high-temp fiberglass voice coil former, high-temp voice coil wire, optimized cone geometry, linear suspension spider, and FEA optimized motor structure.
  High Frequency Driver 25 mm (1 in) PEI diaphragm, low-viscosity ferro-magnetic fluid, and lightweight Kapton™ voice coil former.
  Enclosure Material High Impact Polystyrene (HIPS) with 10% glass fill, painted with highly-UV resistant paint on white (-WH) version for maximum UV fade resistance.
  Grille Highly zinc-plated, finished in durable TGIC polyester powdercoating. MTC-28WMG-1 (&-WH) available with WeatherMax™ multi-layer foam and tight-weave mesh vapor barrier backing.
  Installation InvisiBall wall-mounting system included. Two 6 mm attachment points (on top and bottom) for optional MTC-28WMG-1 (&-WH) U-bracket. Secondary safety attachment loop point on back panel.
  Environmental IP-44 per IEC529 (IP-55 when installed with the optional MTC-28WMG-1 WeatherMax™ grille and either MTC-PC2 or MTC-PC3 panel cover.) Exceeds MilSpec 810 for humidity, salt-spray, temperature & UV. Passes MilStd-202F for salt spray and ASTM G85 for acid-air plus salt spray. Optional MTC-28WMG-1 WeatherMax™ grille for breaking up driving rain and for especially difficult environments.
  Termination Screw-down terminal strip, zinc-plated copper based, nickel-plated metal screws and washers. Accepts up to 9 mm outside 4 mm inside open lugs (#6, #8, or #10 lug), plus bare wire (up to 12 AWG / 2.5 mm2). Optional MTC-PC2 and MTC-PC3 protective panel covers available to provide sealed entrance for additional weather protection.
  Agency Rating ROHS-compliant
  Colors Black (RAL9004) or white (-WH, RAL9016)
  Dimensions (H x W x D)7 386 x 282 x 219 mm (15.2 x 11.1 x 8.6 in); 277 mm (10.9 in) deep total when mounted on InvisiBall wall-mount bracket.
  Net Weight 6.2 kg (13.5 lbs)
  Shipping Weight 13.4 kg (29.5 lbs) pair-packed (for 2 speakers)
  Included Accessories InvisiBall™ wall-mounting system, 6 mm x 180 mm hex key
  Optional Accessories MTC-28UB-1 – Yolk-type U-bracket (&-WH)

Delivery & Returns

At Gear Club Direct, we want you to be happy with your purchase. We understand that there are times when once a product is received, it may not be what you needed or wanted after all. So, we will gladly accept your qualifying return within 15 days of the delivery date. After 15 days of the delivery date, all sales are final. 

 

The Return Process
Customers are required to obtain a Pre-Authorization to return any product. To submit a request for a return, simply log in to your account and request a return and one of our sales representatives will contact you within 24-48 business hours. If you do not have an account with us, please open a help ticket, providing as much detail as possible and whether you are requesting a refund or an exchange.  READ MORE

Customer Reviews