CryoFX Dual Nozzle CO2 Jet

The CryoFX Dual Nozzle CO2 Jet is perfect for those situations when you need two streams of CO2 but don"t want to buy two jets. Each nozzle is independant and able to be adjusted to shoot at a differrent angle than the other. The hose and CO2 Jet listed here have quick connect fittings already installed so you can easily disconnect the hose from the CO2 Jet when not in use. Electricity is required for this package. Simply connect the hose to the CO2 Jet and the other end of the hose to your CO2 tank. Then connect your DMX cable to the CO2 Jet "In" jack and the other end to any DMX 512 controller, and your ready to go! On this unit, the DMX Switch allows you to turn DMX "on" (to use with DMX 512 controllers) or "off" to use as a standard Cryo Jet (controlled using a power switch where as the on/off ability comes from power being applied to the unit). The ideal DMX controller to use with this unit is one with a "Flash" button (button that only send signal when held down), similar to ones used for strobe lights and fog machines. Each nozzle on this CO2 Jet shoots a 20" - 30" foot high stream of CO2 which is about 4"-6" feet wide! These CO2 Jets are used in sporting events, stage productions, nightclubs, bars, live performances, concerts, haunted houses, special events and much more. They are similar to a fog machine but do not linger like fog, leave a residue or weird smell, or set off fire alarms. They also significantly cool down an area very quickly. The CO2 dissipates immediately after coming out of the gun so the cloud vanishes in seconds after the user stops activation. CryoFX Dual Nozzle CO2 Jet is another one of CryoFX best sellers. Its dual nozzles lends to two streams in two directions, while still maintaining a simple design and ease of use. Offering options for both DMX and Standard Power switch on/off capabilities, this versatile unit can be used almost anywhere. While in DMX mode, can be controlled by a DMX 512 controller utilizing 1 channel of DMX for on/off control. While in "Standard" mode, this cryo jet can be controlled by any on/off switch to the power supply feeding power to the unit. (Example: power strip on/off button being used to turn the cryo jet on/off when jet is plugged into the power strip and is in Standard mode). CryoFX Dual Nozzle CO2 Jet is lightweight and has the capabilities to be linked to other units for simultaneous control of multiple jets. Each nozzle may be adjusted individually to release CO2 clouds at any desired angle. This Cryo Jet comes in 110vAC or 220vAC with ability to be installed on truss or used on floor. Built to withstand rugged conditions, the Dual Nozzle CO2 Jet reaches heights of 20-30 feet (7-10 meters) and weighs only 15.4 Lbs (6.9Kg). With easy assembly, included manual and 15 feet (5 meters) of hose, and quick setup time, you will be ready to use this CO2 Jet in minutes, pending you already have CO2. Compatible with both high and low pressure systems. 1 year manufacture warranty. CO2 is not included. This package comes with the following:Dual Nozzle CO2 Jet unit with attached quick connect fitting and base plate for mounting15" foot (5 meters) long high pressure CO2 Cryo hose with attached quick connect fittingCO2 fitting (to connect hose to CO2 Tank) (Tank NOT included)Power Cable3 Pin DMX Cable (15 foot long)Manual, Safety Guidelines, and FAQ (Frequently Asked Questions)

Specificsations

• Model: Mounted Jet Dual Nozzle Switchable
• DMX: DMX 512
• Linkable: Yes, DMX Linkable
• Weight: 15.4 pounds (6.9Kg)
• Dimensions: 13.75" x 13.75" x 22.8" (35cm x 35cm x 58cm)
• Hose Length: 15 feet (4.57 meters)
• Power: 250 W
• Voltage: 110 VAC 50/60HZ (220 VAC Available)
• Pressure Rating:Up to 1100 psi (75.84 bar)
• Operation: DMX 512 or Standard on/off with power switch
• Reach: 20-30 feet (7-10 meters)(depending on humidity) for each stream