CryoFX Cryo Jet DMX Switchable T20

This is a great starter package for any mobile DJ or production company. Included is a custom 20lb Aluminum CO2 Siphon Tank for the CO2 Jet! With the siphon tube, you do not have to turn these tanks upside down as you normally would with others the same size, PLUS they are yours to keep! Simply get them refilled and never have to worry about getting the wrong tank again! The hose and CO2 Jet listed here have quick connect fittings already installed so you can easily disconnect the hose from the CO2 Jet when not in use. Electricity is required for this package. Simply connect the hose to the CO2 Jet and the other end of the hose to your CO2 tank. Then connect your DMX cable to the CO2 Jet “In” jack and the other end to any DMX 512 controller, and your ready to go! On this unit, the DMX Switch allows you to turn DMX “on” (to use with DMX 512 controllers) or “off” to use as a standard CO2 Jet (controlled using a power switch where as the on/off ability comes from power being applied to the unit). The ideal DMX controller to use with this unit is one with a “Flash” button (button that only send signal when held down), similar to ones used for strobe lights and fog machines. This CO2 Jet shoots a 20’ - 30’ foot high stream of CO2 which is about 4’-6’ feet wide! These CO2 Jets are used in sporting games, stage productions, nightclubs, bars, live performances, concerts, haunted houses, special events and much more. They are similar to a fog machine but do not linger like fog, leave a residue or weird smell, or set off fire alarms. They also significantly cool down an area very quickly. The CO2 dissipates immediately after coming out of the gun so the cloud vanishes in seconds after the user stops activation.

 

Plug and play CO2 Cryo Jet (switchable DMX), with hose, fittings, and tank ready to use within minutes. 

 

• CO2 Jet with attached quick connect fitting and attached base plate for mounting
• 15’ foot (5 meter) long high pressure CO2 Cryo Hose with attached quick connect fitting.
• CO2 fitting (to connect hose to CO2 Tank)
• 20lb Co2 Aluminum Siphon Tank.
• 3 Pin DMX Cable (15’ foot long).
• Power Cable
• Manual, Safety Guidelines, and FAQ (Frequently Asked Questions)

NOTE: The CO2 Tank ships empty. CO2 liquid is not included.

 

• Model: Mounted Jet with 20lb Tank
• DMX: DMX 512
• Linkable: Yes, DMX Linkable
• Weight: 14.4 pounds (6.5Kg)
• Dimensions: 7” x 11” x 5” (17.7cm x 27.9cm x 12.7cm)
• Power: 250 W
• Voltage: 110 VAC 50/60HZ (220 VAC Available)
• Pressure Rating:Up to 1100 psi (75.84 bar)
• Operation: DMX 512 or Standard on/off with power switch
• Reach: 20-30 feet (7-10 meters) (depending on humidity)
• Hose Length: 15 feet (4.57 meters)
• Tank Height: 27.5 inches (69.85 cm)
• Tank Width: 8 inches (20.32 cm)
• Tank Weight: 24.75 pounds (9.41 Kg)
• Tank Construction: Aluminum
• Tank Color: Black or Unpainted
• Tank Style: Siphon Tube
• Tank Capacity: 20 pounds (9.07 Kg) (9.08L)
• Tank Valve Outlet Orientation: USA CGA-320 Compatible Only