CryoFX CO2 Swing Jet

The Swing CO2 Jet allows the operator to control the direction of the CO2 Effect stream, up to 180 degrees from side to side. With a DMX Controller, the user can change nozzle direction to point the effect in any direction up to 180 degrees. Electricity is required for this package. Simply connect the hose to the CO2 Jet and the other end of the hose to your CO2 tank. Then connect your DMX cable to the CO2 Jet “In” jack and the other end to any DMX 512 controller, and your ready to go! The ideal DMX controller for the CO2 Swing Jet should have two channels, one for effect on/off and one for moving the nozzle back and forth. This CO2 Jet shoots a 20’ - 30’ foot high stream of CO2 which is about 4’-6’ feet wide! These CO2 Jets are used in stage productions, nightclubs, bars, live performances, concerts, haunted houses, special events and much more. They are similar to a fog machine but do not linger like fog, leave a residue or weird smell, or set off fire alarms. They also significantly cool down an area very quickly. The CO2 dissipates immediately after coming out of the gun so the cloud vanishes in seconds after the user stops activation.

 

CryoFX CO2 Swing Jet will put movement in any production with its 180 degree range of effect output. Using a standard DMX 512 controller, you can maneuver the nozzle back and forth up to 180 degrees while releasing CO2 Clouds creating as much as a “Half Circle” of CO2 and only utilizing 2 channels on the DMX controller (1 channel for on/off of CO2 and 1 channel for movement of “swinging” nozzle)! With the ability to control the movement of the nozzle and the CO2 on/off separately, you have the option to spray CO2 in any direction, side to side, you desire. Multiple units together can create “Arcs” or “Half Circles” of CO2 which will make any show stand out. CryoFX CO2 Swing Jet has the option of 110vAC or 220vAC with the ability to reach a height of 20-30 feet (7-10 meters). Weighing only 19.8 Lbs (9Kg) the Swing Jet can be placed on the floor, mounted on a truss, or suspended from the ceiling. It is linkable to other units through DMX XLR Connectors and comes with a 15 foot (5 meter) hose and 1 year manufacture warranty. Package comes complete with user manual and 15 feet (5 meters) of hose so you are ready to use in minutes. Compatible with both high and low pressure systems. CO2 is not included.

 

Plug and play CO2 Swing Cryo Jet, with hose and fittings ready to connect to use in minutes. 

 

• Swing CO2 Jet unit with attached quick connect fitting and base plate for mounting
• 15’ Foot (5 meters) long high pressure CO2 Hose with attached quick connect fitting
• CO2 fitting (to connect hose to CO2 Tank) (Tank NOT included)
• Power Cable
• 3 Pin DMX Cable (15 foot long)
• Manual, Safety Guidelines, and FAQ (Frequently Asked Questions)

 

• Model: Mounted Swing Jet
• DMX: DMX 512
• Linkable: Yes, DMX Linkable
• Weight: 19.8 pounds (9Kg)
• Dimensions: 11.81” x 7.09” x 9.06” (30cm x 18cm x 23cm)
• Range of Motion: 180 Degrees
• Hose Length: 15 feet (4.57 meters)
• Power: 70 W
• Voltage: 110 VAC 50/60HZ (220 VAC Available)
• Pressure Rating:Up to 1100 psi (75.84 bar)
• Operation: DMX 512
• Reach: 20 - 30 feet (7-10 meters) (depending on humidity)