null
Sale
Crown

Crown XTi 6000 Power Amplifier

$1,679.00
$1,679.00
$1,529.00
You save $150.00
SKU:
XTI-6000
UPC:
8.71015E+11
MPN:
8.71015E+11
Shipping:
Free Shipping
Current Stock:

Out of stock or discontinued
Check new versions and similar products

Description

Big power for the XTi Series.
 
The XTi 6000 from Crown includes improved firmware and Band Manager software that simplifies DSP control and configuring. It also provides all the power you need run big subwoofers or multi-speaker stacks: 1200W per side at 8 ohms; 2100W per side at 4 ohms; and a whopping 6000W bridged mono at 4 ohms.
 
Features
  • Integrated proprietary DSP with LCD front panel display
  • Accurate, uncolored sound with very low distortion for the best in music and voice reproduction
  • Advanced protection circuitry guards against: shorted outputs, open circuits, DC, mismatched loads, general overheating, high-frequency overloads and internal faults
  • Extremely versatile, handling a wide range of speaker impedances and outputs
  • Switch-mode universal power supply
  • Speaker presets for crossover frequencies, EQ, limiting, and delay
  • 2U rackmountable 25 lb.
  • Speakon® and binding post outputs, XLR inputs and loop-thrus
  • Comprehensive LED status per channel
  • 3-year, no-fault, fully-transferable warranty
Specifications
  • Output Power (1kHz Power) (With 0.5% THD):
  • 2 ohm Stereo (per channel) (With 1% THD): 3,000 Watts
  • 4 ohm Stereo (per channel): 2,100 Watts
  • 8 ohm Stereo (per channel): 1,200 Watts
  • 4 ohm Bridge-Mono (With 1% THD): 6,000 Watts
  • 8 ohm Bridge-Mono: 4,200 Watts
  • Requires 20A AC Power
  • Sensitivity (volts RMS) for full rated power at 4 ohms: 1.4V
  • Frequency Response (at 1 watt into 4 ohms, 20Hz - 20 kHz): +0/-1 dB
  • Signal to Noise Ratio (below rated 1 kHz power at 8 ohms), A-weighted: 100 dB
  • Damping Factor (8 ohm): 20 Hz to 400 Hz: > 500
  • Input Stage: Input is electronically balanced and employs precision 1% resistors
  • At Idle: Draws no more than 90 watts
  • Crosstalk (below rated power) 20 Hz to 1 kHz: > 70 dB
  • Input Impedance (nominal):
    • 20 kilohms balanced
    • 10 kilohms unbalanced
  • Load impedance (note: safe with all types of loads) Stereo: 2-8 ohms, Bridge mono: 4-16 ohms 
  • Voltage Gain (at 1 kHz, 8 ohm rated output): 37.1 dB
  • Maximum Input Signal: +22 dBu typical
  • Operating Temperature: 0* C to 40* C at 95% relative humidity (non-condensing)
  • AC Line Voltage and Frequency Configurations Available (+/- 10%): 100V, 120V, 220-240V 50/60 Hz
  • Ventilation: Flow-through ventilation from front to back
  • Cooling: Heat sinks and proportional-speed fan
  • Dimensions (W x H x D) (behind mounting surface): 19 x 3.5 x 16.2 inches (48.26 x 8.9 x 41.15 cm)

Delivery & Returns

At Gear Club Direct, we want you to be happy with your purchase. We understand that there are times when once a product is received, it may not be what you needed or wanted after all. So, we will gladly accept your qualifying return within 15 days of the delivery date. After 15 days of the delivery date, all sales are final. 

 

The Return Process
Customers are required to obtain a Pre-Authorization to return any product. To submit a request for a return, simply log in to your account and request a return and one of our sales representatives will contact you within 24-48 business hours. If you do not have an account with us, please open a help ticket, providing as much detail as possible and whether you are requesting a refund or an exchange.  READ MORE