Blackstar 1X12 60W Guitar Combo

Description
Warranty
Delivery & Returns
Customer Reviews

Description

The Blackstar HT Stage 60 112 MkII is a combo amplifier designed for electric guitars. Utilizing dual EL34 power tubes and a preamp powered by two ECC83 tubes, the amplifier projects 60W of clean or distorted guitar tone out of its 12" Celestion speaker, enough to fill all manner of venues.

The HT Stage 60 112 MkII sports three channels, each equipped with two voicing modes to craft your tone. In the Clean channel, one voicing mode mimics a classic British tone with increased middle and top end. It can be overdriven at higher volume settings. The other voicing mode has a tighter sound with greater bass response and cleaner headroom, more akin to an American-style clean amplifier.

For additional distorted sounds, the two Overdrive channels have their own traditional tone stack consisting of Bass, Middle, and Treble controls, as well as dual voicing modes. When the Voice switch is in the out position, the overdrive takes on a classic crunchy tonality with a tight response. Press the Voice switch in, and the amp will apply more mid-band gain, adding more body for a smoother sound with a looser response.

To complement the traditional tone stack on the overdrive channels, you'll find two ISF knobs that provide an additional layer of tone control per channel. The ISF knob shifts the response of the tone stack between a US-type response with tighter lows and more aggressive mids at one end, and a less-aggressive, woodier UK-type response on the other. Between the two extremes lies an infinite number of alternative tone choices. You'll also note the master volume and presence knobs.

The combo features three 1/4" speaker jacks of varying impedances, as well as an included footswitch for changing between channels and voicings. For expanded footswitch usage, make use of Blackstar's separately available five switch footswitch.

Reverb and Power Reduction Controls

The HT Stage 60 112 MkII features a natural-sounding digital reverb that enhances the amp's clean and dirty tones. A Dark/Light switch allows the overall reverb characteristics to be modified and adjusted for different tastes and playing styles, while a power reduction control lets you reduce power handling down to 10% of the full wattage, making playing at low levels no less powerful for the lack of volume.

Effects Loop, Emulated Output, and USB Interface

Additional amenities on the rear panel of the amp include an effects loop, which can be configured for -10 dBV or +4 dBu, depending on the type of equipment being run in the loop. For studio recording and larger venues, a cabinet-voiced direct out sends a line level signal, which can be routed to an audio interface or a mixing board, precluding the need for a microphone. For this purpose, XLR and 1/4" jacks are both provided.

You can also use the amp's USB port to route digital audio to your recording interface. In this operation, the HT Stage 60 112 MkII provides four discrete outputs: stereo emulated (left channel), stereo emulated (right channel), preamp output (for use with your own effects and cabinet IRs), and a dry signal. The amplifier also accepts two channels of digital signal from your computer.

Key Features at a Glance

60W operation
Tube compliment of 2 ECC83 and 2 EL34
3 footswitchable channels
6 footswitchable voices
Clean channel with expanded tone controls over original model
2 high-gain overdrive channels
2 x ISF tone knobs per channel
Power reduction down to 10% of full wattage
Master volume and presence control
Digital reverb with Dark/Light switch
Speaker emulated output with 1 x 12" or 4 x 12" voicing
Effects loop with effects level switch
USB for recording or playback
1 x 12" Celestion speaker
2-way footswitch included

Blackstar 60 112 MkII Specs

Amplifier Section

Amplifier Type	Tube
Output Power	60 W RMS
Tube Types	2 x Power EL34/6CA7 2 x Preamp 12AX7/ECC83
Channels	3
Master Volume	Yes
Tone Section	Channel 1: Bass, Channel Volume, Presence, Treble Channel 2: Bass, Gain, Mid, Preamp Volume, Presence, Tone, Treble Channel 3: Bass, Gain, Mid, Preamp Volume, Presence, Tone, Treble
Built-In Effects	Digital Reverb
Effects Loop	Yes, Series
Inputs	1 x 1/4" Mono Instrument 1 x 1/4" Mono Effects Return 2 x 1/4" Stereo Footswitch
Outputs	3 x 1/4" Mono External Speaker 1 x 1/4" Mono Effects Send 1 x 1/4" Mono Emulated Speaker 1 x XLR Mono DI
Output Impedance	16 Ohms Mono 8/16 Ohms Mono 8/16 Ohms Mono
USB	1 x USB Type-B Female (Host Connection)

Speaker Section

Configuration	1 x 12" Speaker
Cabinet Type	Straight Semi-Open Mono
Speaker Through/Output	3 x 1/4"
Input Impedance	16 Ohms Mono

Physical

Dimensions (WxHxD)	24.4 x 19.7 x 10.2" / 619.0 x 500.0 x 260.0 mm Combo
Weight	55.34 lb / 25.1 kg Combo

Warranty

null

Delivery & Returns

At Gear Club Direct, we want you to be happy with your purchase. We understand that there are times when once a product is received, it may not be what you needed or wanted after all. So, we will gladly accept your qualifying return within 15 days of the delivery date. After 15 days of the delivery date, all sales are final.

The Return Process
Customers are required to obtain a Pre-Authorization to return any product. To submit a request for a return, simply log in to your account and request a return and one of our sales representatives will contact you within 24-48 business hours. If you do not have an account with us, please open a help ticket, providing as much detail as possible and whether you are requesting a refund or an exchange. READ MORE