Alesis MultiMix 12R Rack Mountable 10-Channel, 12-Input Mixer

Very affordable, very high-quality mixing The Alesis MultiMix 12R Rack Mountable 10-Channel, 12-Input Mixer is a high quality, rack mountable audio mixer designed for recording and sound reinforcement applications. The mixer features 8 mono inputs and 2 stereo paired (L/R) inputs, for a total of 12 line level inputs via balanced 1/4" TRS Phone connectors. Channels 1 through 8 feature XLR Balanced microphone inputs with phantom power (global switch). Each channel features a 2 band EQ (High / Low), 2 AUX sends and PAN (Balance control on stereo inputs). Additional I/O include L/R AUX returns, L/R Tape In and Tape Out jacks via RCA connectors, and L/R Main and Monitor outputs via balanced 1/4" TRS connectors. Channels 1 through 8 feature Inserts for direct routing of channels through out-board effects or signal processors using insert cables. The Insert points are also suitable for use as monitor sends (using tip-sleeve 1/4" cable only). All this enclosed in a convenient rack mountable enclosure provide sonic quality, durability while remaining portable. FeaturesUltra-affordable 12-channel mixer in a 3U rack8 high-gain mic/line (XLR and 1/4" balanced) inputs with phantom power, 2 stereo balanced 1/4" line inputs2 aux sends (pre- and post-fader), stereo aux return, 8 1/4" inserts, 2-track stereo RCA in and outSeparate 1/4" balanced main and monitor outs, front-panel headphone outPan control, peak indicator, and 60mm fader on each channel2-band high/ low shelving EQ per channel10-segment LED stereo metersRack Mountable EnclosureThe mixer is enclosed in a 3-unit rack mountable enclosure making it a suitable road-worthy mixer for recording or sound reinforcement. Mono & Stereo ChannelsChannels 1 through 8 feature mono balanced 1/4" TRS inputs. The 2 remaining channels feature stereo paired (L/R) 1/4" TRS inputs, suitable for keyboards play-back devices and other stereo signals. Balanced Mic Inputs3-pin XLR female microphone inputs are featured on channels 1 through 8. All mic-preamps provide phantom power (global switched) for condenser microphones. Insert PointsChannels 1 through 8 feature insert points for routing channels to effects or signal processors. SpecificationsTotal # Of Inputs: 12 - Total Line InputsMic/Line Inputs 12 - Balanced 1/4" TRS Phone Inputs 8 - Balanced XLR Mic InputsStereo Line Inputs: 2 - Stereo Paired 1/4" Phone (inputs 9,10 & 11,12)In-Line Inputs/Returns: NoAUX Sends: 2 - 1/4" TRS Phone (L/R)AUX Returns: 2 - 1/4" TRS Phone (L/R)Inserts 8 - 1/4" Phone Inserts on Channels 1 through 8BUS (Group) Outputs: Stereo Buss Only2 Trk Master I/: Main Output: Balanced 1/4" Phone (L/R)ALT I/OTape In: Unbalanced RCA female (L/R) Main Out: Unbalanced RCA female (L/R)Monitor Outputs: Monitor Out: Balanced 1/4" Phone (L/R)EQ SectionHigh: 12kHz +/- 15dB Low: 80Hz +/- 15dBSolo/Mute: NoChannel Level Control: Fader ControlTrim/Gain Control Sealed Potentiometers Max Gain: +76 dB, MIC IN to MAIN OUT, balanced +80dB, MIC IN to MONITOR OUT, balanced or unbalancedPhantom Power: +48 Volt (global switch)Metering10 segment stereo peak indicators Phantom and Power indicator LEDsFrequency Response10Hz - 65kHz +0/-1 dB (any input to any output at nominal operating levels) -3dB Point: 125kHzDynamic: Not specified by manufacturerSignal-to-Noise Ratio MIC IN to INSERT OUT: -128.5 dBu Equivalent Input Noise at maximum gain Residual output noise (MASTER fader at nominal, channel faders at minimum): <-88dBu12 inputs, faders and trims at unity gain, inputs terminated 150 ohms: <-85dBu unbalanced (+22 dB max unbalanced out = 107 dB dynamic range)Total Harmonic Distortion (THD)measured with a 0 dBu signal coming into a MIC IN jack with trim set for a +15 dBu output from the insert jack At INSERT jack: >0.0010%At MAIN OUT: >0.0015% (+21 dBu balanced output level)Power Requirement: 120 VAC, 60Hz, 40 watts max. power consumption (U.S.A. model)Dimensions (WxHxD): 18.97 x 5.24 x 4.13" (482 x 133 x 105 mm)Weight: 8 lbs (3.6 kg)